[mcu RP2040]
serial         : /dev/serial/by-id/usb-Klipper_rp2040_E66138935F717729-if00
baud           : 250000
restart_method : command

[resonance_tester]
accel_chip     : adxl345      # adxl345 / lis2dw
probe_points   : 150, 150, 20 # an example of the center of the bed, check yours

[adxl345]
# [lis2dw]
axes_map       : x,y,z        # Default
# axes_map       : x,z,y        # Installed with vertical ADXL
# axes_map       : x,-z,y       # Fysetc Portable Input Shaper
# axes_map       : -y,x,-z      # BTT LIS2DW V1.0 

cs_pin         : RP2040:gpio1
# Hardware SPI Bus
spi_bus        : spi0a

# Software SPI Bus
# spi_software_sclk_pin: RP2040:gpio10
# spi_software_mosi_pin: RP2040:gpio11
# spi_software_miso_pin: RP2040:gpio12