Differences

This shows you the differences between two versions of the page.

--- klipper_faq:flash_guide:rp2040:ebb_sb2209_usb [2023/12/14 12:12] – [Klipper Update TBD] dominik
+++ klipper_faq:flash_guide:rp2040:ebb_sb2209_usb [2023/12/14 18:34] (current) – [YouTube Video #75] dominik
@@ Line 6: / Line 6: @@
 ===== YouTube Video #75 =====
-{{youtube>xxx?half}}
+{{youtube>nLImP-IYeXU?half}}
 \\
@@ Line 137: / Line 137: @@
     * Die UUID mit ''canbus_uuid'' auskommentieren oder löschen
   * In der ''printer.cfg'' noch die neue Konfig einbetten \\ ''[include BTT_EBB_SB2209.cfg]''
-===== Klipper Update TBD =====
+===== Klipper Update =====
   * Klipper Dienst stoppen \\ ''sudo systemctl stop klipper.service''
   * ''cd ~/klipper && make menuconfig''
@@ Line 143: / Line 143: @@
   * ''make flash -j4 FLASH_DEVICE=/dev/ttyACM0''
     * Wie man an den Port (hier ttyACM0) kommt, ist [[ebb_sb2209_usb#port_ermitteln|hier]] beschrieben
-    * Am Ende kann es zu einem Fehler kommen. Davon nicht irritieren lassen. Wichtig ist diese Zeile: \\ ''File downloaded <color #22b14c>**successfully**</color>''
+    * Das Ergebniss sollte so aussehen: \\ <code bash>
-  * Einmal Reset-Taste drücken am Board hilft :-)
+Entering bootloader on /dev/ttyACM0
+Device reconnect on /sys/devices/platform/soc/3f980000.usb/usb1/1-1/1-1.4
+sudo lib/rp2040_flash/rp2040_flash out/klipper.uf2 1 8
+Loaded UF2 image with 101 pages
+Found rp2040 device on USB bus 1 address 8
+Flashing...
+Resetting interface
+Locking
+Exiting XIP mode
+Erasing
+Flashing
+Rebooting device
+</code>
   * Klipper Dienst starten \\ ''sudo systemctl start klipper.service''
 ===== Links =====
-  * https://github.com/bigtreetech/EBB
+  * [[https://github.com/bigtreetech/EBB/tree/master/EBB%20SB2209%20CAN%20(RP2040)]]
-  * Klipper Konfig \\ https://github.com/bigtreetech/EBB/blob/master/EBB%20SB2240_2209%20CAN/sample-bigtreetech-ebb-sb-canbus-v1.0.cfg
+  * Klipper Konfig \\ [[https://github.com/bigtreetech/EBB/blob/master/EBB%20SB2209%20CAN%20(RP2040)/sample-bigtreetech-ebb-sb-rp2040-canbus-v1.0.cfg]]
+  * Schaltplan \\ [[https://github.com/bigtreetech/EBB/blob/master/EBB%20SB2209%20CAN%20(RP2040)/Hardware/BIGTREETECH%20EBB%20SB2209%20CAN(RP2040)%20V1.0-SCH.pdf]]