position_endstop = -0.45 Offset -0.06

ergibt -0.39

https://github.com/VoronDesign/Voron-2
https://vorondesign.com/voron2.4

• https://github.com/garethky/klipper-voron2.4-config/tree/mainline/klipper-config
• https://github.com/VoronDesign/Voron-2/tree/Voron2.4/firmware/klipper_configurations
• https://www.itsalllost.com/adventures-in-klipper/

• https://www.thingiverse.com/thing:1478147 (2020 Extrusion profile cover (Nut 6))
• https://www.thingiverse.com/thing:4342648

• https://vrparts.de
• https://fermio.xyz
• https://vonwange.com

• https://faked.org/voronmods/
• https://github.com/VoronDesign/VoronUsers/tree/master/printer_mods/120decibell/exhaust_housing_side_entry
• https://www.thingiverse.com/thing:2075219
• https://github.com/craxoor/VoronMods/tree/master/PCB%20Cover
• https://github.com/VoronDesign/VoronUsers/tree/master/printer_mods/randell/Door_Hinges
• Nevermore Activated Carbon Filters
  https://github.com/nevermore3d/Nevermore_Micro

• https://github.com/VoronDesign/VoronUsers/tree/master/printer_mods/richardjm/snap-latch-2020
• Kabelabdeckung 2020 Profil
  https://www.thingiverse.com/thing:2645563

• https://github.com/jlas1/Klicky-Probe
• https://github.com/VoronDesign/VoronUsers/tree/master/printer_mods/JosAr/Klicky-Probe
• https://github.com/protoloft/klipper_z_calibration

• https://github.com/VoronDesign/VoronUsers/tree/master/printer_mods/edwardyeeks/Decontaminator_Purge_Bucket_&_Nozzle_Scrubber
• https://vrparts.de/en/products/kupfer-reinigungsburste-copper-brush?variant=40162372616360
• https://meltbro.de/1x-messing-buerste-messingbuerste-metallbuerste-reinigung-des-hotends-3d-drucker.html

• https://caribou3d.com/en/voron-v24/883-18984-ldo-voron-24-printer-kit.html#/86-extrusioncolor-black/250-voronframesize-300mm/252-raspberry_option-yes